Brother HL-5470DW User Manual page 88

General Information
Print Menu (continued)
Submenu Menu Selections
Print Position X Offset
Y Offset
-
Auto FF
HP LaserJet Font No.
Font Pitch
Font Point
Symbol Set
Table Print
Auto LF
Auto CR
Auto WRAP
Auto SKIP
Left Margin
The factory settings are shown in Bold with an asterisk.
Options
-500 / -499 / ... / -1 / 0* /
1 / ... / 499 / 500Dots
-500 / -499 / ... / -1 / 0* /
1 / ... / 499 / 500Dots
On / Off*
I000 / ... / I059* / ... / I071
0.44 / ... / 10.00* / ... /
99.99
4.00 / ... / 12.00* / ... /
999.75
PC-8* / PC-8 D/N / ...
-
On / Off*
On / Off*
On / Off*
On* / Off
##
Descriptions
Moves the print start position (at the
top-left corner of pages) horizontally
up to -500 (left) to +500 (right) dots in
300 dpi.
Moves the print start position (at the
top-left corner of pages) vertically up
to -500 (up) to +500 (down) dots in
300 dpi.
Allows you to print the remaining data
without pressing Go.
Sets the font number.
Sets the font pitch.
Font Pitch menu will appear when
you choose I059 to I071 in
Font No. setting.
Sets the font size.
Font Point menu will appear when
you choose I000 to I058 in
Font No. setting.
Sets the symbol set or the character
set.
Prints code table.
If Change Emulation appears on
the LCD, choose Auto(EPSON),
Auto(IBM) or HP LaserJet in
Emulation of the Print Menu.
(See page 81.)
ON: CR i CR+LF, OFF: CR i CR
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Chooses whether a line feed and
carriage return will happen when the
machine position reaches the bottom
margin.
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
3
82