TO AVOID SPILLING BRAKE FLUID WHILE TOPPING-UP, KEEP THE FLUID
LEVEL IN THE RESERVOIR PARALLEL TO THE RESERVOIR EDGE (IN HORI-
ZONTAL POSITION). DO NOT ADD ADDITIVES OR OTHER SUBSTANCES TO
THE FLUID. IF A FUNNEL OR ANY OTHER ELEMENT IS USED, MAKE SURE
THAT IT IS PERFECTLY CLEAN.
BRAKE FLUID IS HIGHLY CORROSIVE - AVOID CONTACT WITH THE SKIN,
EYES AND BIKE PARTS.
WHEN TOPPING UP, PROTECT THE AREAS NEAR THE TANK WITH ABSORB-
ENT MATERIAL.
Recommended products
AGIP BRAKE 4
Brake fluid
As an alternative to the recommended fluid, other fluids that meet or exceed the re-
quired specifications may be used. SAE J1703, NHTSA 116 DOT 4, ISO 4925
Synthetic fluid
Front braking system
•
Use a short crosshead screwdriver to undo the screws (1) of the front braking
system (2) fluid reservoir.
•
Lift and remove the cover (3) together with the screws (1) and the gasket (4).
•
Top up the reservoir (2) with recommended brake fluid to above the "MIN"
level marking.
04_04
101