North Star M157305G Installation, Operation And Maintenance Manual page 7

II.) Assembly Instructions
A. 1. Carefully raise the pressure washer off the floor by
using blocks or ramps.
washer is secure before proceeding.
2. Install the two wheels as shown with grease zerk
away from frame.
3. Slide the two wheel retainers onto the end of the
axle. Tighten the set-screw with a hex wrench.
Description
Wheel
Wheel Retainer
B. 1. Install the pressure hose onto the pressure washer
as shown.
2. Connect the other end of the pressure hose to the
spray gun as shown.
3. Make sure all plumbing connections are tight.
Description
Spray Gun/ Lance
Spray Hose
Make sure the pressure
Qty.
2
2
Qty.
1
1
Wheel Retainer
Axle
Wheel
Grease Zerk
7