3.7.2 Scan Utility
Scan Utility provides a simple, clear interface
that you can easily view and change Data
Magic settings, and import or export the
settings to your scanner. Currently, Scan
Utility uses RS-232 for data transmission. If
your scanner is connected using the USB
cable, you need to install Virtual COM for
Scan Utility for data transmission. For more
information about installing Virtual COM, see
Virtual COM.
To use Data Magic, start Scan Utility and do
this:
1. On the File menu, click New.
2. In the NEW dialog box, select AI6821
3. In the Scan Utility dialog box, click No.
4. On the Setup menu, click Scanner Setup,
5. In the Data Magic tab, select the Data
6. Click one of the rules you want to set. For
from the Select Model list, and click OK.
and click the Data Magic tab.
Magic check box.
example, if you want to set Rule 1, select
its Enable check box. In the command list,
click the command you want, such as
InsertF. In the position box, type a
position number. In the string list, click
the group you want.
81