(*) Default
Option
*On
Off
3.6.7 Align mode
Decode only the bar codes aligned under the
center of the aiming pattern.
(*) Default
Option
On
*Off
3.6.8 Reset your scanner
By resetting your scanner, you can return your
scanner to the state it was in when you
receive it. This can help you solve some
problems caused by settings changed
between scans.
There are two ways to reset your scanner.
Description
Turn on the
aiming pattern.
Turn off the
aiming pattern.
Description
Turn on the Align
mode.
Turn off the Align
mode.
60
Bar Code
Bar Code