Utilities; Selecting The Power Level - Motorola APX 1000 User Manual

High Enables the voice of the feature to announce
even when the radio is receiving calls.
Low Disables the voice of the feature from
announcing when the radio is receiving calls.
You hear a voice announcement when the features
below are preprogrammed in the radio.
• The radio powers up. The radio announces the
current zone and channel it is transmitting.
• Press the preprogrammed voice announcement
button (which specifically programmed to playback
the current zone and channel). The radio
announces the current zone and channel it is
transmitting.
Note:
Pressing this preprogrammed playback
button enables the voice feature to
announce in High priority.
All the three programmable buttons at the
side of the radio support this feature.
• Change to a new zone. The radio announces the
current zone and channel it is transmitting.
62
English
• Change to a new channel remaining within the
current zone. The radio announces the current
channel.
• Press either the Menu Select button or
preprogrammed button of the radio to launch or
terminate Scan, PL Disabled, Talkaround/Direct or
Transmit Inhibit. The radio announces the
corresponding feature activation or deactivation.

Utilities

Selecting the Power Level

Note:
This feature must be preprogrammed by a
qualified radio technician.
This feature enables you to reduce the transmit
power level for specific case that requires a lower
power level. You can select the power level at which
your radio transmits. The radio always turns on to the
default setting. These reduced transmit power level
settings do not affect the receiving performance of
your radio, nor diminish the overall quality of the
audio and data functionality of the radio given the
following conditions.