Table of Contents
Advertisement
WF SRCHG
Looking for available Wi-Fi
networks that have been
preprogrammed into the radio.
WF CNTG
In the process of connecting to a
found Wi-Fi network.
Connected to one of the
WF CNTD
preprogrammed Wi-Fi networks.
NO
No available networks or
SERVICE
connection with one of the
networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi
signal strength indicator,
Utilities
Using the Flip Display
This feature allows you to flip the content of the top
display upside down. It is particularly useful when you
would like to read the top display while the radio is
still in the carry holder attached to your belt.
To flip the display, press and hold the
preprogrammed Light/Flip button
Selecting a Basic Zone Bank
on the top display.
Selecting the Power Level
The Basic Zone Select feature must to be
preprogrammed to the 3-position A-B-C switch,
while the Basic Zone Bank feature must be
preprogrammed to any side button or Top (Orange)
button before you can use this feature.
This feature allows twice as many zones to be
accessed from a switch, doubling the amount of
switch positions.
Use the preprogrammed Basic Zone Bank button
to toggle the position between Bank 1 and Bank 2.
The top display shows the status icons (A, B, C, D,
E or F) or the zone name based on the bank and
switch position selected.
Note:
See the
Basic Zone Bank 1
Zone Bank 2
icons for more information on
the status icons.
Note:
This feature must be preprogrammed by a
qualified radio technician.
and
Basic
79
English
Advertisement
Table of Contents
