Table of Contents
Advertisement
MN004476A01-AN
Chapter 7: Advanced Features
4. Press
or
to scroll through the list and press Menu Select button directly below Sel to connect
to the selected network.
Result: Radio displays the WiFi status, the selected network, and the signal strength.
NOTE: The List and RfshRefreshRFSH buttons are not available when WiFi is searching or
connecting to network.
7.27.3
Checking the Wi-Fi Configuration and Status of the
Radio
Procedure:
1. Perform one of the following actions:
●
Long press the preprogrammed Wi-Fi button.
●
or to WiFi and press the Menu Select button directly below WiFi.
The display shows the current status of the Wi-Fi as described next.
Searching
Looking for available Wi-Fi networks that have been preprogrammed into the radio.
Connecting
In the process of connecting to a found Wi-Fi network.
Connected
Connected to one of the preprogrammed Wi-Fi networks.
No Service
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator,
addition, the WiFi menu shows Connected under the connection Status heading, what network you
are connected to under the Network heading, and the signal strength to that network under the Sig
Strength heading.
2. Press
to exit.
7.28
Utilities
This chapter explains the operations of the utility functions available in your radio.
7.28.1
Using the Flip Display
When and where to use: This feature allows you to flip the content of the top display upside down. It is
particularly useful when you would like to read the top display while the radio is still in the carry holder
attached to your belt.
Procedure:
To flip the display, press and hold the programmed Light/Flip button.
116
on the front display.In
Advertisement
Table of Contents
