Registering The I2050 Software Phone On Business Communications Manager - Nortel i2050 Installation Manual

Registering the i2050 Software Phone on Business
Communications Manager
If you are using a Business Communications Manager as your communications server, the first
time you start the i2050 Software Phone you must register with the Business Communications
Manager system.
To register your i2050 Software Phone on a Business Communications Manager system:
1
Start the i2050 Software Phone.
2 If a password prompt appears on the i2050 Software Phone display, enter the registration
password and press the OK soft key.
If you do not know the registration password, contact your system administrator.
3
If a DN prompt appears on the i2050 Software Phone display, enter the DN you want assigned
to this telephone and press the OK soft key.
After the registration is complete, you do not need to go through the registration steps described
above unless you deregister the terminal.
If the i2050 Software Phone cannot register or cannot find the communications server, refer to the
IP Telephony Configuration Guide for more information about registering IP telephones.
Chapter 2 Installing the i2050 Software Phone
i2050 Software Phone Installation Guide
31