Table of Contents
Advertisement
Answering a call
Adjusting the ringing
volume
Adjusting the
speaker volume
FULL provides a normal ring volume and cadence. CHIRP
provides one short ring at low volume. NONE provides no
audible ring.
Press the i button. When the portable is ringing, you
can press the m button to stop the ringing/vibration and
continue to answer the call.
When the phone is ringing, you can adjust the ringing
volume with the volume switch. When the phone is not
ringing, use the Menu to access the volume adjustment
levels.
While on a call, pressing b or B can adjust the volume in
twelve steps. The steps 0 to 8 raise the volume, with step 0
the lowest volume. The steps 9 to 11 are for noisy
environments. The display shows the volume step for two
seconds as follows:
• after adjusting the volume
• before making or receiving a call at volume levels 9 to 11
7
Advertisement
Table of Contents
