Installation; Basic Installation; Figure 1 Removal Of Exterior Panels - Bard CRVMP-5 Installation Instructions Manual

INSTALLATION

BASIC INSTALLATION

1. Unpack the ventilator assembly which includes the
integral ventilator with attached electrical harness,
step control assembly and miscellaneous hardware.
WARNING
Open and lock unit disconnect switch before
installing this accessory to prevent injury or
death due to electrical shock or contact with
moving parts. Turn thermostat to off.
Manual 2100-457D
Page 4 of 16
2. Remove and save the existing exterior blower
FIGURE 1
REMOVAL OF EXTERIOR PANELS
TABLE 1
FOR USE WITH
Model
FOLLOWING UNITS
CRVMP-5
access and service access panels on the Bard wall
mount unit. (See Figure 1.)
WA3S
WA4S
WA5S