Installation; Basic Installation; Figure 1 Removal Of Exterior Panels - Bard CRVS-3A Installation Instructions Manual

INSTALLATION

Basic Installation

1. Unpack the ventilator assembly which includes the
integral ventilator with attached electrical harness
and miscellaneous hardware.
WARNING
!
Open and lock disconnect switch before
installing this accessory to prevent injury or
death due to electrical shock or contact with
moving parts. Turn thermostat to off.
Manual 2100-759
Page 4 of 16
Model
CRVS-3A
2. Remove and save the existing exterior blower
access and service access panels on the Bard wall
mount unit (see Figure 1).
FIGURE 1
Removal of Exterior Panels
For Use with
Following Units
T24H
T24H1D T30S
T30H T30S1D
T30H1D