Table of Contents
Advertisement
5.
Figure 3-5.
6.
Connecting Cables to TokenSpeed Ports
This section describes how to connect cables to the ports on a TokenSpeed
module with the following connections:
•
•
893-01019-A
To seat the module against the backplane, rotate the inserter/extractor
levers inward toward each other (see
Seating the module
When the front panel of the module is flush with the front of the chassis, the
module backplane connectors are properly seated.
Align and tighten the captive retaining screw at each end of the module
front panel (see
Figure
Token ring connections to the RJ-45 ports
Management connection to the MCP port
Installing and Connecting the TokenSpeed Module
Figure
3-5).
3-5).
6537
3-5
Advertisement
Table of Contents
