Razor Dirt Rocket MX350 Owner's Manual page 7

repaIr anD MaInTenanCe
8
Tighten brake housing
anchor securely. Re-attach chain
guard. Test ride. Readjust as
needed.
q replacing the fuse
1
Remove battery cover.
q Checking spoke Tension
Flange
Spoke
Nipple
1
Verify spoke tension by grasping and shaking each spoke. Spoke
should not be loose from hub. Look for any play between spoke
flanges where it mates with the hub. You should not be able to spin
any nipple by hand. If one or more spokes is loose, all spokes should
be checked and tightened with a spoke wrench if needed.
2
Locate fuse box
attached to batteries. Open fuse
cover to expose fuse.
Hub
Flange
Spoke
Flange
Rim
Nipple
Amperage
number
3
Remove fuse and replace
with a new one of equal
amperage. Requires 30 amp
fuse. Close the fuse cover and
reattach batery cover.
19
20
1
2
4
3
2
Start with spoke closest to
the tire valve stem and tighten
each nipple, in sequence, exactly
1/4 to 1/2 turn. Continue tighten-
ing all spokes no more than 1/2
turn in sequence until all spokes
are tight.
Note: More than a 1/2 turn each
can cause the wheel to become
distorted and wobbly thus perma-
nently damaging the wheel.
6
warnIng:
To prevent shock, please follow
the instructions accordingly
and do not skip or combine any
steps.