Preparation Before Use; Automatic Operation; Dry Operation; Eco Operation - Toshiba RAS-M22 Owner's Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
2

PREPARATION BEFORE USE

Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries
1. Remove the battery cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Removing the batteries
1. Remove the cover, and take out the batteries.
2. Reattach the cover.
* Please dispose of the batteries according to the local regulation.
Clock Setup
1. Push CLOCK
by tip of the pencil.
If timer indication is fl ashing, go to the next step 2.
2. Press
or
: adjust the time.
ON
OFF
3. Press
: Set the time.
SET
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
AIR FLOW DIRECTION
3
FIX
1
Press
: Move the louver in the
desired vertical direction.
SWING
2
Press
: Swing the air
automatically and press again to stop.
3
For horizontal direction, adjust
manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.
4

REMOTE CONTROL

1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Sleep timer button (SLEEP)
" Setup button (SET)
# Clear button (CLR)
$ Memory and Preset button (PRESET)
% One-Touch button (ONE-TOUCH)
& High power button (Hi-POWER)
( Economy button (ECO)
) Quiet button (QUIET)
~ Comfort sleep button (COMFORT SLEEP)
+ Filter reset button (FILTER)
, Clock Reset button (CLOCK)
- Check button (CHK)
ONE-TOUCH
5
Press the "ONE-TOUCH" button for fully automated operation that is customized
to the typical consumer preferences in your region of the world. The customized
settings control temperature air fl ow strength, air fl ow direction and other settings
to provide you alternate contact with "ONE-TOUCH" of the button. If you prefer
other settings you can select from the many other operating functions of your
Toshiba unit.
ONE-TOUCH
Press
: Start the operation.
1110650153_Book.indd 3
1110650153_Book.indd 3
6
To automatically select cooling, heating operation.
7
8
For dehumidifi cation, a moderate cooling performance is controlled
automatically.
9
To automatically control room temperature and airfl ow for faster cooling or heating
operation (except in DRY mode)
10
To automatically control room to save energy (except in DRY mode)
Note: Cooling operation; the set temperature will increase automatically 1 degree/
11
In case of the misplaced or discharged remote control
1
PRESET
FAN
$
5
TEMP
4
ONE-TOUCH
MODE
12
3
%
~
2
COMFORT
Set the timer when the air conditioner is operating.
QUIET
SLEEP
)
&
SWING
FIX
Hi-POWER ECO
(
6
7
1
#
CLR
TIMER
8
9
ON
OFF
!
"
SLEEP
SET
2
-
CHK
FILTER
CLOCK
,
+
3
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
1
2
Note:

AUTOMATIC OPERATION

MODE
1. Press
: Select A.
TEMP
2. Press
: Set the desired temperature.
COOLING / HEATING OPERATION
MODE
1. Press
: Select Cool
, Heat
TEMP
2. Press
: Set the desired temperature.
Cooling: Min. 17
o
C, Heating: Max. 30
o
C
FAN
3. Press
: Select AUTO, LOW , LOW+
or HIGH
.

DRY OPERATION

MODE
1. Press
: Select Dry
.
TEMP
2. Press
: Set the desired temperature.
Hi-POWER OPERATION
Hi-POWER
Press
: Start and stop the operation.

ECO OPERATION

ECO
Press
: Start and stop the operation.
hour for 2 hours (maximum 2 degrees increase). For heating operation the
set temperature will decrease.

TEMPORARY OPERATION

• Pressing the RESET button, the unit can start or stop
without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 25°C and fan operation is
automatic speed.

TIMER OPERATION

Setting the ON Timer
ON
Press
: Set the desired ON timer.
Press
Press
: Set the timer.
Press
SET
Press
: Cancel the timer.
Press
CLR
Setting Everyday Timer
3
ON
Press
: Set the ON timer.
4
OFF
Press
: Set the OFF timer.
• During the every day timer is activating, both arrows ( , ) are indicated.
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
.
EN
ES
, MED
, MED+
,
FR
IT
DE
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
Setting the OFF Timer
OFF
: Set the desired OFF timer.
RO
: Set the timer.
SET
: Cancel the timer.
BG
CLR
EE
SET
Press
.
LV
SET
Press
button during the ( or )
SK
mark fl ashing.
SI
8/19/10 4:56:25 PM
8/19/10 4:56:25 PM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

24skv series

Table of Contents