Error Messages Shown During Printing - Sharp AR-5127 Series Printer Operation Manual

ERROR MESSAGES SHOWN DURING PRINTING

If any error occurs during printing, an error message will appear in the display of the operation panel. Follow the
message directions to solve the problem. When the messages below appear, see the operation manual.
Display message
Check stapler
position.
Or select item
from below.
Add staples.
Or select item
from below.
CONTENTS
Cause
The stapler unit is not set properly or staple
jam has occurred.
The stapler has run out of staples.
INDEX
Check the stapler referring to the
operation manual. Or, press the
and select "PRINT WITHOUT
STAPLE" or "CANCEL JOB".
Add staples referring to the operation
manual. Or, press the
"PRINT WITHOUT STAPLE" or
"CANCEL JOB".
TOP OF CHAPTER
TROUBLESHOOTING
Remedy
key
key and select
24 24