Meridian Nortel 1 Option 11C Technical Reference Manual page 81

Note 55
DTI/DLI protected data (in words) is comprised of:
PDD_BLOCK + (N x P_DTI_TSET_BLOCK)
+ (T + L) x local network data)
+ (L x (P_LOOP_DLI + preallocated card data))
= 21 + (N x 11) + ((T + L) x 70) + (L x (19 + 144))
Where:
N = the number of Threshold Sets
T = the number of DTI loops
L = the number of DLI loops
Note 56
For each PRI or PRI2 loop configured, add 7 words for the
P_PRILP_BLOCK to the PTERM LOOP_BLOCK (= 78)
Note 57
Protected memory requirements for DCH:
P_DCH_BLOCK = 89 words
Protected call reference table:
= If DCH is in "PRA" mode:
1 + M words, where M is defined as follows:
If PRI is defined:
M = NChan * (nn + 1)
If PRI is NOT defined:
M = NChan * [1 (for primary channel) + 1 (if backup channel is on)]
Where:
nn = Highest Loop Interface Id (defined in Ovl17 by PRI lll nn), and
NChan = 24 for PRI and 31 for PRI2.
Memory, Storage and CPU capacity
Option 11C and 11C Mini
Page 81 of 544
Technical Reference Guide