Page 348 of 544
Configuration mode
Setup mode
553-3011-100
Standard 14.00
M5317 BRI Terminal
This feature is intended for installers and sophisticated users and is
interlocked with power-on and a special key sequence. Some menus are:
•
TEI assignment voice, circuit-switched data, and packet-switched X.25
data (no default, but retained if power lost). X.25 TEI can only be static;
the others must be dynamic.
•
Service Identifier Profile (SPID) assignment for voice and circuit-
switched data, not required for packet-switching. (no default, but
retained if power is lost.)
•
DN assignment for circuit-switched and packet-switched data
•
Test: analog and digital
•
Selection of Codec coding law
•
Selection of voice and circuit-switched data signaling protocol
Setup mode is intended for use by all M5317T digital telephone users. In NI-
1 and Meridian 1 mode, press Setup to display the Setup menu. In MFT mode,
press the center of the volume key to access Setup. The Setup menu includes:
•
alerting tone style and cadence (NI-1 and Meridian 1 mode only)
•
default volume for handset/headset, alerting tones, and speakerphone
(NI-1 and Meridian 1 mode only)
•
query features enabled and DNs (NI-1 and Meridian 1 mode only)
•
Service Profile Management (SPM). Enter the four-digit password
"5317" to display an SPM softkey.
•
various data options (baud rate, parity, etc.)
•
protocol version
•
contrast adjustment
•
language
January 2002