Meridian Nortel 1 Option 11C Technical Reference Manual page 162

Page 162 of 544
Table 38
Insertion Loss Digital Ports To IPE Ports (measured in dB) (Part 2 of 2)
CO/FX/WATS
Loop Tie Trunk
0.5
Toll Office
(See note 2)
8.5
Primary Rate
Interface (PRI)
(See note 3)
6.5
553-3011-100 Standard 14.00
Transmission parameters
2
4.5
6
2.5
6
3.5
Notes to Table 38
1 A satellite tie trunk connects a satellite or tributary PBX to a main PBX.
A tributary PBX does not have its own directory number for incoming
calls.
2 The toll office designation is for a trunk to an office in the public
switched network with a higher rank than the local office (class 5).
3 The 1.5Mb PRI and DTI have digital pads which are controlled by
Meridian 1 software to provide the insertion loss given above. The 2Mb
PRI and DTI have programmable digital pads. The default value for these
pads gives the insertion loss in Table 38. The pad values can be printed
and changed in overlay 73 (LD 73).
January 2002
IPE Ports
2.5
-1 2.5
3.5
0 -2.5
3.5
0 0.5
2 0.5
2
3 5.5
-3
3 2.5
0
-0.5
0.5
-2.5`