2
Depending on your GBIC model, either grasp the extraction
tabs
(Figure
thumb and forefinger, or lift the extractor handle
attached to the GBIC.
3
Slide the GBIC out of the Gigabit Ethernet module slot.
4
If the GBIC does not slide easily from the module slot, use a
gentle side-to-side rocking motion while firmly pulling the
GBIC from the slot.
5
Dispose of the GBIC according to all national laws and
regulations.
Note:
dust cover over the fiber optic bores.
GBIC specifications
Table 2
describes general GBIC specifications.
Table 2 GBIC specifications
Specification
Dimensions (H x W x D)
Connectors
1) located on either side of the GBIC with your
If you are storing a GBIC, remember to place a
Descriptions
0.39 x 1.18 x 2.56 inches
(1 x 3 x 6.5 cm)
Multimode fiber optic: SC
Single-mode fiber optic: SC
7
(Figure
1)