Advertisement
There are four 100BASE-FX MDA models:
•
400-2FX MDA
Not supported on the Accelar Series Modules (see
Table 2 on page 2)
•
8100-2FX MDA
Supports BayStack 350/450, BayStack 410, and
Accelar Series Modules (see Table 2 on page 2)
The 400-2FX MDA and the 8100-2FX MDA (Figure 2)
each use two longwave 1300 nm SC connectors to attach
devices over 62.5/125 micron multimode fiber optic cable.
•
400-4FX MDA
Not supported on the Accelar Series Modules (see
Table 2 on page 2)
•
8100-4FX MDA
Supports BayStack 350/450, BayStack 410, and
Accelar Series Modules (see Table 2 on page 2)
The 400-4FX MDA and the 8100-4FX MDA (Figure 3)
each use four longwave 1300 nm MT-RJ connectors to
attach devices over 62.5/125 micron multimode fiber optic
cable.
The 100BASE-FX MDA models conform to the IEEE
802.3u 100BASE-FX standard and can be used to attach
fiber-based 100 Mb/s connections to other compatible Fast
Ethernet devices. Single-mode fiber cable is not supported.
8
Advertisement
