Advertisement
Installing GBICs
This section describes how to install the gigabit interface
converters (GBICs) to your 450-1GBIC MDA's Host port.
The following optional GBIC versions are available to
support your 450-1GBIC MDA:
Table 13.
Model number Description
1000BASE-SX
1000BASE-LX
1000BASE-XD
1000BASE-ZX
Available GBIC Models
Uses shortwave 850 nm fiber
optic connectors to connect
devices over multimode (550 m/
1805 ft) fiber optic cable.
Uses longwave 1300 nm fiber
optic connectors to connect
devices over single mode (5
km/3.1 mi) or multimode (550
m/1805 ft) fiber optic cable.
Uses single mode fiber to
connect devices over distances
up to 50 km (31 mi), depending
on the quality of the cable.
Uses single mode fiber to
connect devices over distances
up to 70 km (43 mi), depending
on the quality of the cable. The
ports operate in full-duplex
mode only.
38
Part number
AA1419001
AA1419002
AA1419003
AA1419004
Advertisement
