Option
If Off is selected, the multi selector is used to choose the
picture displayed during full-frame playback, highlight
thumbnails, and navigate menus. If On is selected, the main
command dial can be used to choose the picture displayed
during full-frame playback, move the cursor left or right during
Menus
thumbnail playback, and move the menu highlight bar up or
down. The sub-command dial is used to display additional
and
photo information in full-frame playback and to move the
playback
cursor up or down during thumbnail playback. While menus
are displayed, rotating the sub-command dial right displays
the sub-menu for the selected option, while rotating it left
displays the previous menu. To make a selection, press 2, the
center of the multi selector, or J.
f9: Release Button to Use Dial
Selecting Yes allows adjustments that are normally made by
holding the I, E, M, ISO, QUAL, or WB button and rotating a
command dial to be made by rotating the command dial after the
button is released (this also applies to the button to which
bracketing is currently assigned; 0 295). Setting ends when any of
the affected buttons is pressed again or the shutter-release button
is pressed halfway. Except when No limit is selected for Custom
Setting c2 Auto meter-off delay or an optional EH-5a or EH-5 AC
adapter is used, setting will also end when the exposure meters
turn off.
U
298
Description
G button
A Custom Settings menu