Nt6D80 Multi-Purpose Serial Data Link Card - Nortel Circuit Card Installation Manual

Page 118 of 906

NT6D80 Multi-purpose Serial Data Link card

Table 30

NT6D80 Multi-purpose Serial Data Link card

RS-232-D DTE or DCE*
RS-422-A DTE (terminal)
RS-422-A DCE (modem)
RS-232-D DTE or DCE*
RS-422-A DTE
RS-422-A DCE
RS-232-D DTE or DCE*
RS-422-A DTE
RS-422-A DCE
RS-232-D DTE or DCE*
RS-422-A DTE
RS-422-A DCE
* RS-232-D DTE and DCE modes are software configured. RS-422-A DTE and DEC modes are switch
configured.
Note: The device number for the MSDL card is configured in LD17 at the prompt DNUM. You
must also set the device number, using switches S9 and S10, on the MSDL card. S9 designates
ones and S10 designates tens. To set the device number as 14, for example, set S10 to 1 and
S9 to 4.
553-3001-211 Standard 3.00
Option settings
August 2005
Port 0—SW4
all off
all off
all on
Port 1—SW3
all off
all off
all on
Port 2—SW2
all off
all off
all on
Port 3—SW1
all off
all off
all on
Port 0—SW8
all off
all on
all off
Port 1—SW7
all off
all on
all off
Port 2—SW6
all off
all on
all off
Port 3—SW5
all off
all on
all off