Declaration Of Conformity - Bosch GSR 10,8 V-LI-2 Professional Original Instructions Manual

OBJ_BUCH-733-002.book Page 18 Tuesday, May 13, 2008 9:48 AM
18 | English
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for
hard/soft screwdriv-
ing application ac-
cording to ISO 5393
Max. drilling dia.
– Steel
– Wood
Max. screw dia.
Chuck clamping
range
Drill spindle thread
Weight according to
EPTA-Procedure
01/2003
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A). Uncertainty
K =3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a <2.5 m/s , Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a <2.5 m/s , Uncertainty K =1.5 m/s
h
2 609 140 560 | (13.5.08)
The vibration emission level given in this infor-
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
GSR 10,8 V-LI-2
may be used to compare one tool with another.
Professional
It may be used for a preliminary assessment of
3 601 H68 0..
exposure.
The declared vibration emission level repre-
V= 10.8
sents the main applications of the tool. However
if the tool is used for different applications, with
0 – 400
rpm
different accessories or poorly maintained, the
rpm 0 – 1100
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
Nm 30/11
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
mm 10
nificantly reduce the exposure level over the to-
mm 19
tal working period.
mm 7
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
mm 1.0 – 10
the hands warm, organisation of work patterns.
1/2"

Declaration of Conformity

We declare under our sole responsibility that
kg 1.1
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
16.04.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
,
2
.
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools