Base Unit; Document Handling; Output Options - Konica Minolta bizhub 554e Specification & Installation Manual

554e/454e
Konica Minolta bizhub 554e/454e
Specification & Installation Guide
Accessory Options for bizhub 554e/454e Digital Printer/Copier/Scanner
Accessory Options for bizhub 554e/454e Digital Color Printer/Copier/Scanner/Fax
ACCESSORIES ITEM NO.

BASE UNIT

554e A61D011
454e A61E011

DOCUMENT HANDLING

DF‑701 Standard
PAPER SUPPLY/CABINET OPTIONS
DK‑510 7640017610
LU‑204 A0TJWY4
LU‑301 A03NWY2
PC‑110 A2XMWY1
PC‑210 A2XMWY2
PC‑410 A2XM013

OUTPUT OPTIONS

FS‑533 A2YUWY1
FS‑534 A3EPWY1
FS‑534 A3EPWYA
+ SD‑511
FS‑535* A2Y1WY1
JS‑506 A2YVWY1
JS‑602 A10CWY1
OT‑506 A4MDWY1
PI‑505* A10AWY1
PK‑519 A3EUW11
PK‑520 A3ETW11
PK‑521* A2YRW11
SD‑512 A2Y2WY1
ZU‑606* A109W12
34
DESCRIPTION
554e Printer/Copier/Scanner
454e Printer/Copier/Scanner
Single Pass Dual Scan
Document Feeder
Copy Desk
Large Capacity Unit
(2,500 sheets)
Large Capacity Unit
(3,000 letter sheets)
Paper Feed Cabinet
2‑way Paper Feed Cabinet
Large Capacity Cassette
Inner Finisher
Floor Finisher
Staple Finisher (50 Sheets)
+ SD‑511 Saddle Stitcher
Staple Finisher (100 Sheets)
Job Separator Tray
Job Separator Tray
Output tray
Post Inserter
2‑/3‑Hole Punch Kit
2‑/3‑Hole Punch Kit
2‑/3‑Hole Punch Kit
Saddle Stitcher Kit
Z‑Fold Unit
NOTES
Includes PS, PCL & XPS Controller, 2 GB Standard Memory, Dual Scan Document Feeder,
Duplex Unit, 250 GB HDD, USB Interfaces for Scan-to-USB Thumb Drive/Print-from-USB
Thumb Drive, USB Local Printing, Optional Authentication Device Connection, Service USB
Firmware Updates, Developer Unit and Drum Unit.
Includes PS, PCL & XPS Controller, 2 GB Standard Memory, Dual Scan Document Feeder,
Duplex Unit, 250 GB HDD, USB Interfaces for Scan-to-USB Thumb Drive/Print-from-USB
Thumb Drive, USB Local Printing, Optional Authentication Device Connection, Service USB
Firmware Updates, Developer Unit and Drum Unit.
100-Sheet Single Pass Dual Scan Document Feeder; Compatible with bizhub 364e, 284e, 224e.
Storage Drawer only.
Large Capacity Cassette housing 8.5" x 11"
(service adjustable); brings maximum paper supply to 6,150 sheets. Backwards compatible
with C652DS/C652/C552DS/C552/C452 (please note that this version of the LU-204 must
be used with the C754/C654/C554e/C554/C454e/C454/754/654/554e/454e). SRA3 paper
only supported on C754/C654/C554e/C554/C454e/C454/554e/454e.
Large Capacity Cassette housing 8.5" x 11"
Backwards compatible with C652DS/C652/C552Ds/C552/C452 and C650/C550/C451
(please note that this version of the LU-301 must be used with the C754/C654/C554e/C554/
C454e/C454/754/654/554e/454e).
One 500-sheet Universal Paper Cassette and Storage Drawer.
Two 500-sheet Universal Paper Cassettes.
2,500 sheets; Letter-Size (Portrait) Paper only.
50-sheet Inner Staple Finisher required to support PK-519 Punch Kit.
Supports banner printing.
50-sheet staple finisher required to support PK-520 Punch Kit. Supports banner printing.
50-sheet staple finisher equipped with SD-511 Saddle Stitcher that provides center-stapled
and folded booklets (up to 20-page booklets), half-fold and tri-fold (for letter-size paper only);
Supports banner paper.
100-sheet staple finisher; required to support optional JS-602 Job Separator Tray, optional
PK-521 Punch Kit, optional SD-512 Saddle Stitcher, optional PI-505 Post Inserter and
optional ZU-606 Z-Fold Unit; Supports banner printing. Please note JS-602 and PI-505
cannot both be installed on an FS-535. Not compatible with 454e.
Separates print, copy and fax jobs; can be installed if finisher is not attached;
supports banner printing.
Adds 3rd tray to FS-535 to enable separating print, copy and fax output; Cannot be installed
if PI-505 Post Inserter is attached.
Exit Tray; installed if a finisher is not attached.
For cover insert sheets and manual finishing for FS-535; Cannot be installed if JS-602 Job
Separator Tray is installed. Not compatible with 454e.
2-/3-Hole Punch Kit for FS-533 Inner Finisher.
2-/3-Hole Punch Kit for FS-534.
2/3-Hole Punch Kit for FS-535. Not compatible with 454e.
Saddle Stitcher; Requires FS-535 Staple Finisher; provides center-stapled and folded
booklets; (up to 20 page booklets)
Adds Z-Fold and Hole Punch functionality to FS-535. Backwards compatible with C652DS/
C652/C552DS/C552. (Please note that this version of the ZU-606 must be used with the 554e).
Not compatible with 454e.
P / L , 8.5" x 14", 11" x 17", 12" x 18" or SRA3
P paper; brings maximum paper supply to 6,650;
* bizhub 554e only.
10/03/2013