Options; Specifications And Options - Icom IC-A120 Basic Manual

D Receiver
• Receive system:
• Intermediate frequencies:
• Sensitivity:
IC-A120
IC-A120E
• Squelch sensitivity:
IC-A120
IC-A120E
• Spurious response rejection ratio:
IC-A120
IC-A120E
• Audio output power:
External speaker More than 10 W
(at 13.75 V DC with 8 Ω load 60% mod, 10%
distortion)
Side tone More than 100 mW
(at 13.75 V DC with 500 Ω load 60% mod,
10% distortion)
All stated specifications are subject to change without
notice or obligation.
Double conversion
superheterodyne
1st 38.85 MHz
2nd 450 kHz
Less than 1 μV (pd)
(at 6 dB S/N)
Less than –101 dBm
(12 dB SINAD with CCITT)
Less than 0.35 μV (pd)
Less than –116 dBm
More than 5 mV (pd)
More than 70 dB

SPECIFICATIONS AND OPTIONS

■ Options

HM-217
speaker micrOphOne
The speaker microphone with [∫]/[√] keys and [P1]/[P2]
keys.
VS-3
Bluetooth ®
headset
The Bluetooth ® headset with a [PTT] switch.
UT-133A
Bluetooth ®
unit
OPC-871A
headset adapter
The adapter to connect a standard headset.
OPC-478UC
clOning cable
The cable to connect a PC and the OPC-592
when you control the transceiver with
cable adapter
the CI-V commands.
OPC-592
clOning cable adapter
The cable adapter to connect the transceiver and the
OPC-478UC
clOning cable
transceiver with the CI-V commands.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.
clOning
when you control the
5
05
12