Surrounding Space - Kyocera FS-600 Installation Manual

Environmental Requirements of the Page Printer
Grounding
WARNING

Surrounding space

WARNING
4
Be sure to connect the ground wire for the printer's power supply to the ground terminal of the power
outlet, to a copper pole buried at least 65 cm (25 inches) in the ground, or to a water pipe approved by
the water department for use as a ground.
Never use a gas pipe as a ground, as this may result in fire.
Space surrounding the location where the printer is installed is required as shown below for purposes of
ventilation and maintenance.
Be sure to secure enough space surrounding the printer. Continued use without enough space
may cause heat to build up within the printer, resulting in fire.
5 cm (2 inches)
50 cm (19.6 inches)
30 cm (11.8 inches)
40 cm (15.7 inches)
25 cm (9.8 inches)