Editing The Route; Setting A New Starting Point - Alpine X701D/INE-W997D Owner's Manual

3. Tap to display historical traffic information. A 2D map is displayed with road
segments coloured by the likely density of the traffic in the given period. The
information relevant for the current period is shown when you open the screen. If
necessary, you can browse the map for a better view of certain road segments. Modify
the day of week and the time of day to see the desired period.

3.4 Editing the route

When navigation has already started, there are several ways to modify the planned route.
You have the following options:

Setting a new starting point, see page 42

Adding an additional destination, see page 43

Modifying the list of destinations, see page 44

Saving the planned route, see page 45

Deleting the planned route, see page 45

Selecting a route alternative when planning the route, see page 46

Selecting a route alternative for an existing route, see page 47

Pausing guidance, see page 1.

3.4.1 Setting a new starting point

For normal navigation, all routes are calculated from the current position. You can pause
navigation to check future routes, simulate them or see their length in time and distance. Then
you can set the starting point of the route to a location other than the current GPS position.
1. Press the navigation hardkey button to access the Navigation menu.
2. In the Navigation menu, tap .
42