Alpine X701D/INE-W997D Owner's Manual page 114

You can perform the following actions on the map:
Action
Checking No buttons
location
information
Moving the No buttons
map by
dragging
Zooming in and
out
Tilting up and
down
Rotating left
and right
Changing 2D,
3D, or 2D
North up views
Checking the
compass
Selecting
additional
options
Selecting a
destination
Button(s)
The top section of the Navigation view shows
information about the selected point (the cursor
).
Move the map in any direction: tap and hold the map
and move your finger towards the direction you want to
move the map.
Change how much of the map is displayed on the
screen.
,
Alpine Navigation System uses maps that let you
examine the locations at various zoom levels, always
with optimised content. It always displays street names
and other text with the same font size, never upside-
down, and you only see the streets and objects that
you need.
Map scaling has a limit in 3D map view mode. If you
zoom out further, the map switches to 2D view mode.
Tap once to modify the view in a large step, or tap and
hold the button to modify it continuously and smoothly.
Change the vertical view angle of the map in 3D mode.
,
Tap once to modify the view in a large step, or tap and
hold the button to modify it continuously and smoothly.
Changes the horizontal view angle of the map.
Tap once to modify the view in a large step, or tap and
,
hold the button to modify it continuously and smoothly.
Switch between the 3D perspective, 2D Heading up,
and 2D North up map view modes. In Heading up
, ,
mode the map is rotated so its top always points in the
current driving direction. This is the default orientation
in 3D map view mode. In North up mode, the map
faces North.
The direction of the compass shows North.
Open a list of additional features like saving a location,
or searching for Places around the cursor.
Select the cursor location as a new destination. The
route is automatically calculated.
Function