Alpine X701D/INE-W997D Owner's Manual page 169

Manoeuvre restrictions and one-way streets are taken into account
when planning a route.
Roads are used only if access for buses is allowed.
Private roads, resident-only roads and walkways are excluded from
routes.
Manoeuvre restrictions and one-way streets are taken into account
when planning a route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are excluded from
routes.
Manoeuvre restrictions and one-way streets are taken into account
when planning a route.
Roads are used only if access for lorries is allowed.
Private roads, resident-only roads and walkways are excluded from
routes.
U-turns are excluded from routes (turning back on a divided road is not
considered as a U-turn).
If the map contains data on dimension, weight and freight restrictions,
they can also be taken into account when planning a route.
Creating a profile makes it possible to set up vehicle parameters used in route planning. You
can have several profiles for the same vehicle.
To add a new vehicle profile, perform the following steps:
1. Tap
2. Select the vehicle type and set the parameters below. Depending on the vehicle type,
some parameters may not be available in the list.
3. Tap
You can set the following parameters:
Button
Rename the profile for something meaningful, for example John's car.
Set the maximum speed you travel at.
Enter the average consumption of your vehicle in built-up areas. The
unit for consumption can be set in Regional settings.
Enter the average consumption of your vehicle on highways. The unit
for consumption can be set in Regional settings.
Select the engine and fuel type of your vehicle. It helps estimate the
CO
, browse the list of vehicles, and tap
to access additional parameters.
emission.
2
66
Function
.