NordicTrack ELITE NTL19806.5 User Manual page 24

Press the TV button again and save cable
5
channels into the television's memory.
When the TV button is pressed, the television will
begin scanning all of the cable channels available
in your area. When no cable signal is detected on
a channel, the channel will be skipped. When a
cable signal is detected, the channel will be saved
into memory and the next channel will be selected.
This process will continue until the highest chan-
nel is reached. Do not remove the key while the
television is scanning channels. Note: If you are
viewing channels through an external source
such as a cable box or a VCR, the television will
save only the channel used by the external
source.
When you are finished using the information
6
mode, remove the key from the console.
To exit the information mode at any time (except
while the television is scanning channels), remove
the key from the console.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re-
duces the impact as you walk or run on the treadmill.
To increase the firmness of the walking platform, step
off the treadmill and slide the platform cushions toward
the front of the treadmill. To decrease the firmness,
step off the treadmill and slide the platform cushions
toward the back of the treadmill. Note: Make sure that
both cushions are set at the same firmness level.
The faster you run on the treadmill, or the more you
weigh, the firmer the walking platform should be.
Platform
Cushion
Increase
Decrease
24
Platform
Cushion
Walking Platform