Basic Operation - IVT 12PHR-N Operation Manual

BASIC OPERATION

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to
the room temperature and outdoor temperature
when the unit is turned on.
• During operation, if the outdoor temperature
changes, the temperature settings will auto-
matically slide as shown in the chart.
Modes and Temperature Settings
7KH ¿JXUHV LQ DUH WHPSHUDWXUH VHWWLQJV
Press the MODE button to select the
1
operation mode.
2 Press the ON/OFF button to start
2
operation.
• The red OPERATION lamp (
will light.
5
3
3 Press the THERMOSTAT button to set
the desired temperature.
1
AUTO/DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
4
determined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the range
of 18 to 32°C.
4 Press the FAN button to set the desired
fan speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5 To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp (
will turn off.
GB-6
AUTO HEAT COOL
(Example: 1°C higher)
(Example: 2°C lower)
AUTO SOFT LOW
DRY
) on the unit
HIGH
) on the unit