System Reboot; Reboot Schedule - TP-Link T2600G-28TS User Manual

is not checked, the uploaded firmware file will take place of the Backup Image. To start with the
uploaded firmware, you should exchange the Next Startup Image and Backup Image in
Config and reboot the switch.
Note:
1. Upgrading the firmware will only upgrade the backup image.
2. You are suggested to backup the configuration before upgrading.
3. Please select the proper software version matching with your hardware to upgrade.
4. To avoid damage, please don't turn off the device while upgrading.

4.3.5 System Reboot

On this page you can reboot the switch and return to the login page. Please save the current
configuration before rebooting to avoid losing the configuration unsaved.
Choose the menu System→System Tools→System Reboot to load the following page.
Note:
To avoid damage, please don't turn off the device while rebooting.

4.3.6 Reboot Schedule

On this page you can schedule a reboot plan for the switch. Users can configure the reboot
schedule in two modes. The first one is to reboot the switch in a specific time interval. The second
one is to reboot the switch at a specific time and date.
Users can choose whether to save the configurations before the reboot. If Save Before Reboot is
not checked, the reboot schedule will be deleted after the next reboot.
Choose the menu System→System Tools→Reboot Schedule to load the following page.
Figure 4-14 System Reboot
Figure 4-15 Reboot Schedule Setting
23
Boot