Firmware Upgrade; System Reboot - TP-Link T1700G-28TQ User Manual

Note:
It will take a few minutes to backup the configuration. Please wait without any operation.

4.3.4 Firmware Upgrade

The switch system can be upgraded via the Web management page. To upgrade the system is to
get more functions and better performance. Go to
firmware.
Choose the menu System→System Tools→Firmware Upgrade to load the following page.
Please pay attention to the checkbox "After upgrading, the device will reboot automatically
with the backup image". If the checkbox is checked, the switch will reboot with the uploaded
firmware file, and the current Next Startup Image will switch to the Backup Image. If the checkbox
is not checked, the uploaded firmware file will take place of the Backup Image. To start with the
uploaded firmware, you should exchange the Next Startup Image and Backup Image in
Config and reboot the switch.
Note:
1. Upgrading the firmware will only upgrade the backup image.
2. You are suggested to backup the configuration before upgrading.
3. Please select the proper software version matching with your hardware to upgrade.
4. To avoid damage, please don't turn off the device while upgrading.

4.3.5 System Reboot

On this page you can reboot the specified unit switch and return to the login page. Please save the
current configuration before rebooting to avoid losing the configuration unsaved.
http://www.tp-link.com
Figure 4-15 Firmware Upgrade
29
to download the updated
Boot