The Remote Control Does Not Function Properly - NordicTrack 30505.0 User Manual

• Blue Screen—If the treadmill is located in the fringe area of a television station where the signal is
weak, the picture may be of poor quality or a blue screen may appear. If the signal is weak, it may
be necessary to install an external antenna to improve the picture.
Note: If one of these symptoms appears when the cable from a CATV company is connected, the
symptom may be caused by the local company broadcast.
PROBLEM: The remote control does not function properly
SOLUTION: a. When pressing buttons on the remote control, point the
remote control toward the sensor on the pulse bar.
Make sure that the sensor is not exposed to direct
sunlight.
b. Make sure that the batteries in the remote control are properly installed. If the batteries are prop-
erly installed, replace the batteries. (See assembly step 7 on page 10.)
a
32
Sensor