Presetting Radio Stations; Playing Preset Radio Stations - Sony LBT-G200K Operating Instructions Manual

Presetting Radio
Stations
You can store radio frequencies in the
tuner's memory to tune in your favorite
stations quickly. You can preset up to 20
FM stations, 10 MW stations and 10 SW
stations in any order.
Use the buttons on the unit for presetting
stations.
SYSTEM
2,4
POWER – ON
1
Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
z FM z MW z SW
2
Press TUNING (+/–) to tune in the
station you would like to store.
3
Press TUNING MEMORY.
"MEMORY" appears in the display.
Preset channel number
4
Press TUNING (+/–) to display the
preset channel number you decided on
(1 to 20 for FM, 1 to 10 for MW/SW).
5
Press TUNING MEMORY.
"MEMORY" disappears, and the station
is stored at the preset channel number
you decided on.
Preset channel number
Station frequency
6
Repeat steps 1 to 5 for each station you
would like to store.
To erase a stored station
Store a new station at a previously used
preset station number. It will erase the old
station and replace it with the new station.
If you have trouble storing a station
Make sure "MEMORY" is lit in the display.
If not, press TUNING MEMORY again so
that "MEMORY" lights up (for about eight
seconds) in the display, and then proceed
with steps 4 and 5.
3,5
1
Playing Preset Radio
Stations
Once you have preset the stations, use the
TUNING (+/–) buttons to quickly tune in
your favourite stations.
SYSTEM
POWER – ON
VOLUME
BAND
1
Press TUNER/BAND (or BAND on the
remote) repeatedly until the band you
want appears in the display.
z FM
3
2
1
PRESET (+/–)
z MW z SW
VOLUME
2
Press TUNING MODE repeatedly so
that "PRESET" appears in the display.
3
Press TUNING (+/–) (or PRESET (+/–)
on the remote) to tune in a preset
station.
The station frequency appears and the
system begins receiving the stations.
Preset channel
Station frequency
Chapter 3: the Radio
EN
11