NordicTrack ViewPoint NTL13007.0 User Manual page 8

2. Attach two Base Pads (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82). Note: One replacement
Base Pad may be included. Use the Base Pad to
replace any Base Pad that becomes worn.
3. With the help of a second person, carefully tip
the treadmill onto its other side as shown.
Partially fold the Frame (55) so that the treadmill
is more stable. Do not fully fold the Frame
until the treadmill is completely assembled.
Insert the other Extension Leg (97) into the indi-
cated bracket on the base of the Uprights (85).
Attach the Extension Leg (97) with two
Extension Leg Bolts (87), two 5/16" Star
Washers (110), and two Extension Leg Nuts
(91) as shown. Firmly tighten the Extension
Leg Bolts.
4. Attach two Base Pads (81) to the base of the
Uprights (85) in the indicated locations with two
#8 x 1" Tek Screws (82).
With the help of a second person, carefully tip
the treadmill down so that all four Base Pads
(81) are resting on the floor and the Uprights
(85) are in the vertical position.
2
3
85
91
4
81
82
8
85
81
81
82
Bracket
110
97
55
85
81
82
82
87