NordicTrack ViewPoint NTL13007.0 User Manual page 13

Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
treadmill, a VCR or DVD player to the audio/video input jack, or a personal audio/video player to the
audio/video plug below the television on the console. Note: Use a CATV cable to connect to an external
source such as a cable box, analog cable, satellite TV box, or VCR. No CATV cable or audio/video wire is in-
cluded.
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the 75
ohm terminal on the
treadmill frame near
uprights.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the 75
ohm output jack on your external source.
2. Plug in the power cord of your external source. See
your external source's user's manual for proper
grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm ter-
minal on the treadmill frame near the uprights.
75 Ohm CATV Cable
75 Ohm Terminal
HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK
1. Connect the three-pronged end of an audio/video
wire to your DVD player or VCR.
2. Plug in the power cord of your DVD player or VCR.
See your DVD player or VCR user's manual for
proper grounding instructions.
3. Connect the audio/video wire to the audio/video
input jack on the back of the console.
HOW TO CONNECT A PERSONAL AUDIO/VIDEO
PLAYER DIRECTLY TO THE CONSOLE
Locate the audio/video plug below the television on the
console, and plug it into a jack on your MP3 player, CD
player, or other personal audio/video player.
13