Table of Contents
Advertisement
OPERATING INSTRUCTIONS
1. ADJUSTING AIR SPEED
The fan has 3-Speeds (OFF, LOW,
MEDIUM AND HIGH).
Rotate the speed control switch on
the back of the unit to adjust air flow
to desired speed (positions 0, 1, 2, 3).
2. ADJUSTING OSCILLATION FEATURE
The internal oscillation feature can be
turned on by setting the RED switch on
the motor to the ON (1) position.
To disengage the oscillation feature,
push the RED switch to the OFF (0) position.
CARE AND MAINTENANCE
•
Unplug from electrical source to clean.
•
Use soft damp cloth to clean. Following that, wipe with clean dry cloth.
•
Do not bend the fan blades.
•
Store in a dry place.
TROUBLESHOOTING
Before returning to your retailer, call our customer service department at 1-866-994-4148 ,
8 a.m. - 6 p.m., EST, Monday - Thursday; 8 a.m. - 5 p.m., EST, Friday.
PROBLEM
Fan won't run.
Oscillating feature not
working.
POSSIBLE CAUSE
1.
Fan is not plugged in.
2.
Unit is not turned on.
1. Oscillating feature is
not turned on.
CORRECTIVE ACTION
1.
Make sure unit is
plugged in.
2.
Check that unit is
turned on.
1.
Make sure that
oscillation switch is
turned on.
7
Hide quick links:
Advertisement
Table of Contents
