Maximum Speed Indicator - Invacare Spectra Plus User Manual

Maximum Speed Indicator

This is a gauge that shows the maximum speed setting of the wheelchair. There are five speed settings:
- step 1 is the lowest speed and step 5 is the highest speed
Mode Switch - Speed Settings
The mode switch is used to make the maximum speed changes and to change between wheelchair
operation modes.
If the mode switch is operated whilst you are driving the maximum speed setting will be increased by one
step. Each successive operation of the mode switch will increase the setting, when the setting is at 5 the
next mode switch operation will put the setting to 1. The diagram below explains this action.
Operating the mode switch will put the control system back into the drive mode.
Operating the mode switch will put the control system back into the drive mode.
If the mode switch is operated when the joystick is centred, the control system operation mode will be If the mode switch is operated when the joystick is centred, the control system operation mode will be
changed. There are three modes - drive, speed adjustment and actuator adjustment. The diagram below changed. There are three modes - drive, speed adjustment and actuator adjustment. The diagram below
explains this action.
explains this action.
SPEED 5
SPEED 4
Fig. 1 Operation of Mode Switch Whilst Driving
Fig. 1 Operation of Mode Switch Whilst Driving
ACTUATOR
ADJUST
Fig. 2 Operation of Mode Switch Whilst Joystick Centred
SPEED 1
SPEED 2
SPEED 3
DRIVE
MODE
SPEED
ADJUST
15