Table of Contents
Advertisement
Touch Screen Message
Scanner Error
Model Error
After Error Recovery
Press the Stop button
Scanner Error
Fatal Error
After Error Recovery
Press the Stop button
Scanner Error
Page Size Error
After Error Recovery
Press the Stop button
8-16
Troubleshooting
Solution
A scanner other than the EPSON
GT-10000+ or EPSON EXPRESSION 1640XL
is connected to the copy station.
Confirm the scanner model, then press
the y stop button and try copying
again.
If this error occurs even though a correct
scanner model is connected, press the
Retry button on the copy station control
panel.
An undefined error has occurred.
Turn off the power of the scanner, and
then turn it back on again.
If the scanner returns to normal
operation, press the y stop button, then
try copying again.
If the error persists, this may indicate a
problem with the scanner. Contact your
dealer.
The size or direction of the document
loaded in the ADF unit is not correct.
Reload the document correctly, then
press the y stop button and try copying
again.
Advertisement
Table of Contents
