Table of Contents
Advertisement
Touch Screen
Message
Printer Error
Photoconductor
Restart System
Printer Error
Waste Toner Box
After Error
Recovery
Job will Continue
Printer Error
Irregular Density
Restart System
Printer Error
Photoconductor
Restart System
Printer Error
Photoconductor
Restart System
Printer Error
Cover A Open
After Error
Recovery
Job will Continue
Printer LCD Panel
Message
Replace
Photoconductr
Replace Waste T
Box
Irregular Density
Wrong
Photocondctor
Photocondctr
Trouble
Cover A Open
Solution
The photoconductor unit
has reached the end of its
service life. Turn off the
printer power and replace
the photoconductor with a
new one.
The waste toner collector is
full. Replace it with a new
waste toner collector the
close the front cover of the
unit. The error will clear and
printing will continue.
Printing is canceled
because the color density
on the current page is too
high to be processed by the
printer. Remove all paper
from the paper path, then
turn the printer off and on to
clear this error.
The installed
photoconductor unit
cannot be used with this
printer.
Turn off the printer power
and install the correct
photoconductor unit.
The installed
photoconductor unit is
malfunctioning.
Turn off the printer power
and install a usable
photoconductor unit.
The cover on the left side of
the copy station is open.
Close the cover to clear this
error. Printing will continue.
Troubleshooting
8
8-11
Advertisement
Table of Contents
