Inlink (Cec-Compatible) Device - Insignia NS-48D510NA17 User Manual

Problem Solution
/INPUT
• Make sure that the Button Lock
button does
option is set to Off. See
not work.
power button on your TV
• Unplug the power cord, wait a few
seconds, then plug the cord back in
and turn on your TV.
TV keeps
• Make sure that the sleep timer is not
turning off.
turned on. See
on page 52.
A retail
• You selected Store Display Mode
banner is
when you ran the Easy Setup wizard.
displayed.
Run the Easy Setup wizard and select
Home User Mode on the Viewing
Environment screen. See
TV settings

INlink (CEC-compatible) device

Problem Solution
My TV is not
• Make sure that the HDMI cable is
displaying the
connected securely to your TV and
video from
the device.
the connected
• Make sure that the device is
CEC device.
connected to your TV with an HDMI
cable.
• Make sure that the device is a CEC
device. See the documentation that
came with the device for more
information.
• Press INPUT and make sure that the
correct video input source is selected.
See
on page 31.
• Make sure that the INlink feature is
turned on. See
on page 34.
• Try adjusting the TV picture. See
Adjusting the TV picture
61
Locking the
on page 49.
Setting the sleep timer
Customizing
on page 55.
Selecting the video input source
Turning INlink on or off
on page 38.
www.insigniaproducts.com
Problem Solution
My TV is not
• Make sure that the HDMI cable is
playing the
connected securely to your TV and
audio from
the device.
the connected
• Make sure that the device is
CEC device.
connected to your TV with an HDMI
cable.
• Make sure that the device is a CEC
device. See the documentation that
came with the device.
• Make sure that the TV volume is
turned up and not muted.
• Try adjusting the TV sound. See
Adjusting sound settings
• Make sure that the TV speakers are
turned on and not muted. See
Adjusting sound settings
• Make sure that the INlink feature is
turned on. See
on page 34.
• If you have connected an HDMI CEC
audio receiver, adjust the volume on
the receiver. When your TV detects an
audio receiver, the TV speakers turn
off and sound plays through receiver
speakers only.
• If you are using a home theater
system, soundbar, or external speaker
system, make sure that it is turned on
and is not muted.
• If you are using a home theater
system, soundbar, or external speaker
system, make sure that you have
selected the correct output mode.
• If you are using a home theater
system, soundbar, or external speaker
system and have connected it with a
digital audio cable, select Digital
Audio Format/Audio Delay on the
Audio menu, then set Audio Format
to PCM. See the Digital Audio
Format/Audio Delay option in
Adjusting sound settings
48"/55" 1080p 60Hz LED TV
on page 40.
on page 40.
Turning INlink on or off
on page 40.