Connecting External Speakers Or A Soundbar; Digital Audio - Insignia NS-48D510NA17 User Manual

Connecting external speakers or a soundbar

You can connect external speakers using:

• Digital audio

• Analog audio
Digital audio
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or soundbar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on your TV and to the
optical AUDIO IN jack on the digital speaker system or soundbar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or soundbar.
5 On your TV's Audio menu, highlight Digital Audio Format/Audio Delay, then press ENTER or . Set the Audio
Format option to PCM. See the Digital Audio Format/Audio Delay option in
23
Digital speaker system
Soundbar
Digital optical
audio cable
www.insigniaproducts.com
Side of TV
Adjusting sound settings
48"/55" 1080p 60Hz LED TV
on page 40.