Recommended Cutting Equipment For Canada - Husqvarna 555 Operator's Manual

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Emissions Durability Period according to California Air
Resources Board, h.
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chain saw without bar or chain, empty tanks, lb/kg
Chain/bar
Guide bar-mount
Standard bar length, inch/cm
Recommended bar lengths, inch/cm
Usable cutting length, inches/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at 133% of maximum engine power
speed, m/s.
NOTE! This spark ignition system complies with the Canadian standard ICES-002.

Recommended cutting equipment for Canada

The listed combination(s) of powerhead, guide bar and saw chain meet all requirements outlined in Canadian Standards
Assosiation Z62.1-11 (Chain Saws) and Z62.3-11 (Chain Saw Kickback).
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar. As we are listing the maximum guide bar nose radius, you may use
a guide bar with smaller nose radius than in our list. For guide bars of the same length, all sprocket-nose guide bars of
the same pitch and having the same number of sprocket teeth may be considered to have equivalent kickback energy.
A hard nose guide bar having the same length and nose radius as a sprocket-nose guide bar may be considered to have
equivalent or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed guide bars and saw chains or "Type C Low-Kickback Saw Chains"
which are available at your dealer.
40 – English
TECHNICAL DATA
3
560XPG 562XP
3,65/59,8 3,65/59,8
1,81/46 1,81/46
1,42/36 1,42/36
2800 2800
3,5/4,8 @ 9600 3,5/4,8 @ 9600
300 300
NGK CMR6H NGK CMR6H
0.02/0,5 0.02/0,5
1.37/0,65 1.37/0,65
6-15 6-15
0,74/0,35 0,74/0,35
Adjustable Adjustable
13,0/5,9 13,0/5,9
Small Large
18/46 20"/51
13-24"/33-61 16-28"/41-71
12-23"/31-58 15-27"/38-69
0,325"/8,25 3/8" /9,52
0.050/1,3 0.050/1,3
0,058/1,5 0,058/1,5
Rim/7 Rim/7
28,3 28,3
562XPG
3,65/59,8
1,81/46
1,42/36
2800
3,5/4,8 @ 9600
300
NGK CMR6H
0.02/0,5
1.37/0,65
6-15
0,74/0,35
Adjustable
13,5/6,1
Large
20"/51
16-28"/41-71
15-27"/38-69
3/8" /9,52
0.050/1,3
0,058/1,5
Rim/7
28,3