Technical Data; Recommended Cutting Equipment Specification; Splineway Combinations For Different Cutting Equipment - Husqvarna K6500 Chain Operator's Manual

Technical data

Motor
Electric motor
Max. speed of output shaft, rpm
3-phase operation, Motor output - max. kW
1-phase operation, Motor output - max. kW
Weight
Machine with cable package, without cutting equipment, kg/Ibs
Water cooling
Water cooling of cutting equipment
Recommended water pressure, bar/PSI
Min. recommended water flow, litres/min / gal(US)/min
Connecting nipple
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed dB(A)
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels, a (see note 3)
hv
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 60745-2-13. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 2,0 dB(A).
Note 3: Vibration level, according to EN 60745-2-22. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,0 m/s
Recommended cutting equipment specification
Number of
Guide bar and
diamond chain
diamond chain
segments:
12" (0,444")
14" (3/8")
16" (0,444")

Splineway combinations for different cutting equipment

Splineway
Supplied with K6500 Chain
7 splines
9 splines
24 – English
TECHNICAL DATA
2
.
Diamond chain
segment width,
mm/inch:
25 5,7/0,22
32 5,7/0,22
29 5,7/0,22
Rim sprocket
0,444"
3/8"
4,5 at water temperature 15°C
) conforming to EN 60745-1.
WA
Diamond Max cutting
chain pitch, depth, mm/
mm/inch: inch
11,582/0,444 350/14
9,525 / 3/8 400/16
11,582/0,444 450/18
Guide bar
Purchased separately
0,444"
3/8"
K6500 Chain
HF High Frequency
9000
5,5
3
9,1/20,0
Yes
1,5-6 / 21,8-87
Type "Gardena"
110
112
99
2,7
2,1
Chain speed at max.
engine power speed,
m/s / ft/s
26/85
24/79
26/85
Diamond chain
0,444"
3/8"