Special Mode - Canon i-SENSYS MF3010 User Manual

Special Mode

Use the Special Mode settings to fix print quality problems.
Read the following carefully before changing the settings.
IMPORTANT
Use default settings in normal operation
Change the settings only when the problems noted below occur.
Settings That Can Be Specified From the Operation Panel
Settings
Default settings are highlighted in bold.
Special mode
Special Mode b
Special Mode c
Special Mode d
Options
0 Off Due to the paper type or usage conditions, vertical streaks appear on the
output. When this occurs, change this setting.
Mode
1
The effect becomes greater as the number goes up.
1
Mode
2
2
Streaks can be minimized by changing the paper type or usage
Mode
conditions, without needing to change the setting.
3
3
The more effective the setting, the lower the density becomes.
Additionally, the outline of text and images may be reproduced less
Mode
4
clearly, and images may appear slightly jagged.
4
0 Off Vertical streaks appear on the output after the toner cartridge was replaced
recently, or the machine has not printed anything for an extended period of
Mode
time.
1
1
When this occurs, change this setting.
Mode
The effect becomes greater as the number goes up.
2
2
Streaks can be minimized by changing the paper type or usage
Mode
3
conditions, without needing to change the setting.
3
The more effective the setting becomes, the slower the print speed.
0 Off Due to the paper type or usage conditions, paper curls or creases. When this
occurs, change this setting.
Mode
The effect becomes greater as the number goes up.
1
1
Paper curls and creases can be minimized by changing the paper type
and usage conditions, without needing to change the setting.
This setting can be selected when
Mode
2
<Paper Type> is set to <Plain (16 lb Bond-24 lb Bond)>, <Plain L
2
(16 lb Bond-24 lb Bond)>, <Heavy paper>, <Rough paper>,
<Label>, or <Envelope>
<Off> -> <Mode 1> -> <Mode 2> -> <Mode 3> -> <Mode 4>
(low)
<Off> -> <Mode 1> -> <Mode 2> -> <Mode 3>
(low)
<Off> -> <Mode 1> -> <Mode 2>
(low)
Details
(high)
(high)
030E-058
(high)