Combustible Materials - Thermador PRD364NLGU Dimension Manual

PRD364NLGU
36-INCH DUAL-FUEL PRO GRAND
WITH GRILL
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH "LOW BACK"
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1 / inch of a
4
flame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
Installation Clearances with Low Backguard
36" (914 mm) min.
to combustible
materials
35 / " (911 mm) Min.
7
8
36¾" (933 mm) Max.
As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
RANGE
®
31¼" (794 mm)
29 / " (740 mm)
1
8
25 /
1
8
max. recess depth
26 /
7
8
48¾" (1238 mm)
Page 4 of 5
9" (229 mm)
Lowback
" (638 mm)
" (683 mm)
Combustible
Materials
Combustible
Back Wall
11 / 15