Assembly - NordicTrack COMMERCIAL NTEL16907.0 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own Phillips screwdriver , adjustable
wrench , and rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.
5/16" Nylon 5/16" Split #10 Fender 5/16" Washer 5/8" Wave Pivot Spacer
Washer (105)–4
Washer (102)–6
Locknut (106)–4 Washer (80)–10 (104)–6 (71)–4
#8 x 3/4" #10 x 1/2" 5/16" x 1.5" Button 5/16" x 1" Patch
Screw (78)–4 Screw (79)–10 Bolt (73)–4 Screw (81)–10
5/16" x 2 1/2" Button
Screw (88)–8
5